Load the 250-Sheet Plain Paper Tray Accessory
Follow these instructions to load the 250-Sheet Plain Paper Tray Accessory.
Two parts
The 250-Sheet Plain Paper Tray Accessory has two parts.
1 Base
2 Lower tray
The lower tray has three size adjusters.
Chapter 12
160
HP Deskjet 6980 series
1 Paper-width guide
2 Paper-width fence
3 Paper-length guide
Note
When changing the paper size in the paper tray, you must set all three
paper guides.
Set the paper size
When changing the paper size in the paper tray, all three paper guides must be set to
the correct setting.
Follow these steps to set the paper size:
1.
Remove the lower tray from the base.
2.
Slide the paper-width guide until the arrow is even with the correct setting.
1 Align the arrows
User's guide
161
Note
To print on legal-sized paper, set the paper-width guide to
LTR
.
3.
Set the paper-width fence by carefully inserting it into the appropriate slots.
1 Tilt the fence forward
2 Insert the fence into the appropriate slots
3 Tilt the fence back until it locks into place
Note
To print on legal-sized paper, set the paper-width guide to
LTR
.
4.
Set the paper-length guide by pulling it until the arrow lines up with the paper size.
1 Align the arrows
Note
To print on legal-sized paper, pull the paper-length guide all the way
out.
Load paper
Follow these steps to load paper:
1.
Remove the lower tray from the base.
2.
Verify that
all three paper guides are set
to the correct setting.
3.
Insert the paper into the lower tray.
Chapter 12
162
HP Deskjet 6980 series
4.
Insert the lower tray in the base until it locks into place.